Thursday, January 17, 2013

Mirrorless and Wireless

Samsung Galaxy Phone
The Samsung Galaxy Camera runs the Andriod OS
Last week, over 150,000 people gathered in Las Vegas for the 2013 Consumer Electronics Show, the world's largest annual innovation event. For those interested in cameras and imaging, the most important trends involve the shift to mirrorless cameras and the introduction of dozens of Wi-Fi enabled enabled cameras.

Camera manufacturers are hoping that both of these can slow down the shift to capturing images on smartphones instead of dedicated cameras. The popularity of smartphone photography resulted in a 19% decrease in the volume of compact camera sales in the United States last year. This is not surprising considering that the iPhone 4 and 4S are the number one and number two devices used for uploading images to Flickr.

However, iPhone users tend to be photocentric and there is a strong correlation between iPhone ownership and SLR camera ownership. Although the resolution of the iPhone is sufficient for most uses, it's fun to have a camera that allows more creative control in certain situations. While a digital SLR camera has been the typical choice for these situations, mirrorless interchangeable lens cameras are a nice upgrade.

Digital SLRs are generally an adaption from 35mm cameras. Originally, the size of the film dictated the size of camera body and the size of mirror which deflected the image to the viewfinder. The mirror was required because the film was a passive sensor which could only display an image after it was exposed in the camera and developed afterwards. Camera makers based their digital cameras on film cameras because they could reuse their camera designs. Photographers bought them because they looked and felt like high quality devices and could work with lenses they already owned.

Mirrorless cameras with interchangable lenses offer the advantages of of SLRs without the bulk or the weight. By using the digital sensor for both image capture and the viewfinder, there is no need for a mirror. By optimizing the optical path for the actual sensor size rather than 35mm film, more light can be captured with smaller lenses and the camera body is smaller. Photographers are figuring this out pushing the sales of mirrorless cameras up 141% in 2012.

Part of the fun in photography is sharing. Compared to smartphones, sharing with dedicated cameras has been cumbersome. After taking a picture, you had to move the image from your camera to your computer and post it to Facebook or Flickr through your browser. The new Wi-Fi enabled cameras imply that you can take your picture and immediately upload it to your favorite social media site.

In reality, there is a great deal of difference between the capabilities of the different Wi-Fi enabled cameras. The Samsung Galaxy Camera and the Nikon Coolpix S800C run the Android OS which means they can upload images using the same apps that are available on the Android smartphones. The Canon EOS 6D transfers images to preferred websites through the Canon Image Gateway. Others require transfer to your smartphone or tablet before you can share your images with your friends.

I enjoy sharing snapshots directly to Facebook from my iPhone. But when I use my "real" camera, part of the enjoyment is the selection and editing process on a big monitor after I get home. Then I share my best images on Facebook and on this blog.  So I'm not in a hurry to own a Wi-Fi enabled camera.

Will you be upgrading your camera soon?


 You might also like:

The Best Camera

Camera Glasses

The Price of Canvas


Camera sales data from GfK reported in the November/December issue of International Contact.


Thursday, January 10, 2013

The Best Camera

Milwaukee Museum of Art
The Milwaukee Museum of Art


"The best camera is the one that's with you." - Chase Jarvis.



In some ways, I understand that the best camera is the one that's with you, but it's not true for me.  I have an iPhone in my pocket everyday and walk past dozens of photo opportunities without seeing them. I know the camera in the phone can capture nice images, but the scene would have to reach out and hit me before I would notice.



For me, the best camera is one that reminds me that I love photography. When I pick up a "real" camera, I become aware of the beauty and texture of the world around me.  I see things that I would not take time to see otherwise.

A "real" camera does not have to be an expensive digital SLR. It can even be an iPhone. As long as it initiates the mental transition into "photographer."

Lake Michigan from the Milwaukee Museum of Art
Lake Michigan from the Milwaukee Museum of Art


You might also like:

Camera Glasses

Wide and Wonderful

Mizzou in 3D




Thursday, January 3, 2013

Additive Manufacturing Pioneers

Emma's "magic arms" 3D printed via Stratasys
Emma's "magic arms" were 3D printed.
In my last post of 2012, I made the observation that I would be following additive manufacturing, sometimes called 3D printing, closely in 2013. In that post, I noted that the technique had reached an inflection point where it would change manufacturing, distribution and marketing radically. Here are some of the most important companies in the industry.

  • Stratasys Ltd. manufactures 3D printers that that use the Fusion Deposition Modeling method of extruding molten plastic in layers to build a part. In 2012, Stratasys merged with Objet Ltd. which builds machines that use a PolyJet process. The PolyJet process employs an ink jetting process to apply photo photopolymers in fine layers. Each layer is cured simultaneously with ultraviolet light.
  • 3D Systems makes a variety of different 3D printers for personal and professional use. These machines can be used for manufacturing prototypes or final parts. The company was founded by Chuck Hull who invented Stereolithography, the original 3D printing technology. In early 2012, 3D Systems acquired Z Corporation which supplies machines that can build full color models.
  • Arcam AB is a Swedish company that provides a unique technology for the production of metal parts. Electron Beam Melting builds parts layer-by-layer from metal powder melted by a powerful electron beam. The technology is used primarily in the medical, aerospace and defense industries.
  • Mcor prints photo-realistic 3D parts from paper. This is the printer that Staples is market testing in some of their stores in the Netherlands and Belgium.
  • Renishaw is a UK based company with core skills in measurement, motion control, spectroscopy and precision machining. Their product line includes additive manufacturing technologies encompassing laser melting, vacuum casting and injection molding.
  • ExOne calls their additive manufacturing process Digital Part Materialization and their machines are used for 3D printing of sand and metal materials.
  • The NovoGen MMX Bioprinter™ from Organovo takes primary or other human cells and shapes them into 3D tissue for biological research. This technology was developed by a team led by Professor Gabor Forgacs from the University of Missouri in Columbia.
  • Makerbot is a rapidly growing manufacturer of desktop personalized printers. The printers are used by engineers, designers, researchers and people who just like to make things.
  • Shapeways is a 3D printing marketplace and community where individuals can make, buy and sell their own products. They 3D print everything on-demand which means that every order is customized and personalized.
  • Cubify is a website from 3D Systems to encourage you to "express yourself in 3D!" You can look for something unique that has been 3D printed or design and print your own creations from scratch. If you want to print at home, the site encourages you to purchase a Cube 3D printer which is "plug-and-play easy and looks pretty nice on a worktable."
  • Sculpteo offers a 3D printing service which is open to professionals or consumers. They can print from your 3D design or their community platform gives you access to 3D designers allowing you to share models, upload your own 3D designs and make them real through 3D printing.
  • i.materialise believes that people have an inherent need to express themselves and provides 3D printing services for demanding designers and inventors. 
  • Ponoko claims to be "the world's easiest making system" and offers both 2D laser cutting and 3D printer services.
  • To make a file for additive manufacturing, you will need software. Autodesk, Inc., is a leader in 3D design, engineering and entertainment software.

These are the companies that will change our world over the next decade. Are there any I should have included but missed?


You might also be interested in:

3D Printing Crosses an Inflection Point

Focus for 2013

To Think Different, Read Different



Thursday, December 27, 2012

Focus for 2013

Human Eye
Who's In There by Stuart Dootson
We are on the verge of a new year. The world changes at an increasingly faster rate. Do you have plans to change accordingly?

The beginning of a new year is traditionally a time for setting goals and making resolutions. The difficulty with defining specific goals and resolutions is getting the world to cooperate. I find it more helpful to define areas of focus. Focusing attention on areas for growth and improvement help me be better prepared for the challenges of the upcoming year and beyond.

Here are things that I intend to focus on in 2013:
  • Personalized Stationery -While the decline of offset printing continues, the demand for personalized items is growing rapidly. Beautiful printing on thick, deeply textured paper is a hot growth market.
  • Additive Manufacturing - I believe additive manufacturing has reached an inflection point where the growth rate is going to exceed almost everyone's expectations and have an unimaginable impact on the future of manufacturing, distribution and marketing.
  • Functional Inks - The deposition of conductive inks and other functional materials using aerosol jetting and similar technology is a very promising method for revolutionizing the manufacturing of electronic components.
  • Twentieth Century History - Think of how different the world was in 2000 compared to 1900. I want to understand more about the thought processes of the people who caused those changes.
  • Film Scores - I have appreciated the music of John Williams since Star Wars, but this year I want to get more familiar with the music of Elmer Bernstein, Jerry Goldsmith, John Barry and some of the other great composers who have contributed to the great films of the last 50 years.
Unless you have been doing nothing in 2012 or have discovered a way to add more hours to the day, your focus list is worthless without a matching not-to-do list.  The only way to make time for a new focus is to spend less time on something else. Are there fields where you have focused enough in the past that the law of diminishing returns has kicked in? There is always more to learn, but is the value of that knowledge worth the time to acquire it?

Time is our most valuable resource.  A little advanced planning can help make sure we use it in the most enjoyable and most productive way.

In what areas do you plan to focus in the upcoming year?


You might also be interested in:

Do Your Own Annual Review

Make a Not-To-Do List

3D Printing Crosses an Inflection Point







Thursday, December 20, 2012

In Vino Veritas

Beringer Vineyards founded 1876
Early this month, after attempting to divine the future of electronics manufacturing at a conference in the Silicon Valley, Terri and I decided to spend a day in the Napa valley. The Beringer Vinyards turned out to be ideal for enjoying the luxury of a far older technology.

Brothers Jacob and Frederick Beringer founded the vineyard in 1876, making it the oldest continuously operating vineyard in the United States. The tools of traditional wine making are preserved in the 19th century cellars.

Grape press at Beringer Vineyards
 
After the grape harvest, the grapes are pressed to squeeze the juice from the fruit.  The design of a grape press may have inspired the creation of the first printing press.

Fermentation barrels at Beringer Vineyards

 Sugars in the grapes convert to alcohol in these fermentation barrels. Today, the vineyard uses stainless steel fermentation vessels in a modern facility across the street.


Aging barrels in the cellar at Beringer Vineyards

Most red wines and some whites are aged in oak barrels. Over time, characteristics from the oak change the wine adding complexity in the flavor. For centuries, the aging took place in underground cellars to maintain a constant 58 degree temperature.

Dusty bottles in the cellar at Beringer Vineyards

The Beringer family's private wine collection is stored in these dusty bottles in the cellar.

Wine bottles lined up on a shelf in the gift shop

Before the wine bottles gather dust, they reflect and refract light in some very interesting ways.

The Rhine House at the Beringer Vineyards

The Rhine House is a beautiful 17 room mansion that was built by Frederick Beringer to recreate the family house on the Rhine River in Germany. Frederick and Jacob had emigrated from Germany in 1868.

Our day in the Napa valley was filled with wonderful sights and flavors.  Do you have a favorite valley?



You might also like:

Diverse Experience Drives Creativity

Brilliant Copy Writing

The Price of Canvas


Thursday, December 13, 2012

Changing the Odds

Ariel from Disney's Little Mermaid
Ariel wants to be where the people are!   © 1989 Walt Disney Studios
Many people believe that success is just a matter of luck. Some people just happen to be in the right place at the right time.

I believe there is validity in this point of view. It is good to be lucky. However, in a highly mobile society with compulsory education and an unlimited flow of information at our fingertips, all of us have tremendous opportunities to improve our probability of being in the right place at the right time and recognizing opportunity when it appears.

Knowledge and preparation are the first step in enhancing serendipity. It is important to spend time everyday learning and some of that time should focus on the following questions:
  • What industries and companies are going to be growing in the future? 
  • What skills are required to lead in one of those growing industry?  
  • What is your plan for acquiring those skills?

Ariel in Disney's Little Mermaid expressed the next step in these lyrics:

I wanna be where the people are
I wanna see, wanna see them dancin'!
I'm ready to know what the people know
Ask 'em my questions and get some answers

If you want to increase your chances for success, get out!  Get out of your office! Get out of your immediate circle of friends! Get out of your comfort zone!

Go find and meet the people who are creating the future.  Spend more time with customers, more time at trade shows, more time interacting with the thought leaders in your field.

What have you done lately to improve your odds of success?

You might also like: 

Do Your Own Annual Review

Circle Your Customers with Innovation

Collision of Ideas








Thursday, December 6, 2012

Closer to the Heart

Heart shaped stone at the Bay of Stoer
Heart shaped stone at the Bay of Stoer ©Ulrich Hartmann CCL


I have been listening to some classic Rush recordings recently and have found myself troubled by the opening line of the song Closer to the Heart. Overall, I like the sentiment expressed by the song and agree that each of us play a role in making the world a better place.


The phrase that bothers me is "And the men who hold high places, must be the ones who start." My concern is that the belief is naive and actually discourages action by ordinary people.

To me, "the men who hold high places" implies leadership in government. In a democratic society, those who get elected are those that embrace the beliefs of the majority of the population and offend the fewest members. This process makes it highly unlikely that any new initiative will begin at the top. Political leaders follow public opinion, they do not lead it.

Change begins at the bottom, usually with those neglected and reviled by the majority. Through hard work and time, justice is accepted by more and more people.  Eventually, support for change crosses a tipping point where those in governmental leadership positions are willing to risk lending their support.

If we wait for change to begin with government, we will never mold a new reality.  Change must begin with churches, businesses, non governmental agencies and individuals.

Change must begin with you and me!

I am not able to change the historic lyrics to classic rock songs, but if I could, I would rewrite the opening line of Closer to the Heart to:
And the ones who care most deeply
Must be the ones who start!
To mold a new reality
Closer to the heart
Closer to the heart

The blacksmith and the artist
Reflect it in their art
They forge their creativity
Closer to the heart
Closer to the heart

Philosophers and ploughmen
Each must know his part
To sow a new mentality
Closer to the heart
Closer to the heart

You can be the captain
I will draw the chart
Sailing into destiny
Closer to the heart
   Rush
Rush Farewell to Kings

You might also like:

The Age of Creativity

Print Can Be Art

Looking Forward